Choosing the right dining table size means balancing room dimensions, seating capacity, and the clearance space around the table. Many tables look fine on paper but feel cramped once chairs are pulled out and people start moving around.
This guide walks you through how to choose a dining table size using simple sizing rules, standard dimensions, and practical layout advice. You will learn the 90 cm clearance rule, an easy sizing formula, common table dimensions, and how to match shape and seating to the way you actually live.
Liverpool Dining Table (Black)
Start With the 90 cm Clearance Rule
The most important rule in dining table sizing is not the table size itself - it is the space around it. Get clearance wrong and the room will feel tight even if the table technically fits.
What is the minimum clearance around a dining table?
The minimum clearance around a dining table is 90 cm on each side.
Clearance is the distance from the table edge to a wall, cabinet, or other piece of furniture. That 90 cm zone gives people enough room to pull out a chair, sit down, stand up, and move around for everyday use.
- 90 cm is the baseline minimum for a standard dining room.
- Measure from the edge of the tabletop, not from the centre of the room.
- This is enough for function, but not always enough for real comfort.
Liverpool Dining Table (Natural)
When should you allow 105 to 120 cm instead?
Allow 105 to 120 cm when the dining area also functions as a walkway. That extra breathing room makes a genuine difference in real homes, especially when someone needs to pass behind a seated guest during a meal.
This wider clearance works particularly well for:
- Homes with children moving in and out during meals.
- Open-plan layouts that flow into the kitchen.
- Dining rooms with patio doors or high foot traffic.
- Households that host regularly.
For example: if your dining table sits between the kitchen island and the living room, 120 cm on the traffic side will feel far more comfortable than 90 cm.
Why clearance affects your daily experience
Clearance shapes how the room works every single day. A table may fit mathematically and still feel oversized once chairs are in place and people are moving around - that is where many buyers go wrong.
- It gives chairs room to move without scraping walls.
- It keeps walkways open and safer for everyone.
- It makes the room feel relaxed rather than squeezed.
Get clearance right first. Then choose the largest table that still lets the room breathe.
Measure Your Dining Space Correctly
Most sizing mistakes happen before shopping even starts. People measure wall to wall, then forget to account for chair pull-out, sideboards, and the natural paths people walk through the space.
Measure the space the way you will actually use it.
Measure the full room or the usable dining zone
If you have a dedicated dining room, measure the full room. In an open-plan home, measure the usable dining zone only - the footprint where the table and chairs will actually sit.
- Identify the area where the table will live.
- Measure the length and width of that zone in centimetres.
- Mark where people naturally walk through the space day to day.
In open-plan layouts, the dining area often shares circulation with the kitchen, island, or living room. That shared traffic path must stay clear.
9
Liverpool Dining Table (Natural)
Account for walls, sideboards, doors, and walkways
Do not measure empty floor space and assume it is all usable. Subtract the space taken up or affected by:
- Sideboards and buffets.
- Built-ins and shelving.
- Door swing arcs.
- Kitchen islands.
- Radiators or heating units.
- Window placement if it limits where the table can sit.
- Main walkways through the room.
A table can fit in an empty room and fail completely once real furniture and movement patterns are added back in.
Liverpool Sideboards (Black)
Note your measurements clearly
Write down every measurement in centimetres. Most Australian furniture retailers list dimensions in centimetres, though some international product specs still use inches - it helps to know both when you are comparing options online.
Use painter's tape to map the table footprint before buying
Painter's tape is one of the fastest and most reliable ways to test a table before you commit to buying it.
- Tape the outline of the table on the floor.
- Add a second line to show chairs pulled out, or place actual chairs around the taped outline.
- Walk around the setup the way you would during a normal day - getting up mid-meal, squeezing past to reach the kitchen, or moving around with a serving dish.
This method reveals tight passageways and awkward corners that product photos never show. It is often more useful than trying to visualise dimensions from a spec sheet.
Liverpool Dining Table (Black)
Use a Simple Formula to Find the Right Table Size
If you want a quick starting point, use this formula. It tells you the largest table your room can handle while maintaining 90 cm of clearance on all sides.
The basic dining table sizing formula
Maximum table length = room length minus 180 cm
Maximum table width = room width minus 180 cm
The reason you subtract 180 cm is simple: you need 90 cm of clearance on each side, and 90 cm plus 90 cm equals 180 cm. This gives you the theoretical maximum table size - not necessarily the most comfortable one. If the room also has a sideboard, a walkway, or bulky chairs, size down from there.
Adjust the formula for more comfortable spacing
If you want better circulation - especially in busy or open-plan homes - subtract more from the room dimension.
- For 105 cm clearance: subtract 210 cm from each room dimension.
- For 120 cm clearance: subtract 240 cm from each room dimension.
Use the larger subtraction if people regularly walk behind seated diners, if the home has an open-plan layout, or if the dining area connects to another busy zone.
Quick examples by room size
|
Room Size |
Room in cm |
Max Table Size (90 cm rule) |
Practical Note |
|---|---|---|---|
|
3 m x 3.7 m |
300 x 370 cm |
120 x 190 cm |
Works if there is no major walkway conflict |
|
3.4 m x 4.3 m |
340 x 430 cm |
160 x 250 cm |
Often better to size down slightly for comfort |
|
3.7 m x 4.9 m |
370 x 490 cm |
190 x 310 cm |
Large on paper - confirm chair space and traffic flow |
These are theoretical maximums. If the room includes a sideboard, a traffic path, or a door swing, choose a smaller table.
A fast shortcut if you want an answer quickly
- Measure your usable dining space in centimetres.
- Subtract 180 cm from both the length and the width.
- Find the nearest standard table size at or below that result.
If you are deciding between two sizes, choose the smaller one - unless you host frequently and plan to buy an extendable table.
Standard Dining Table Dimensions to Know
Once you know your maximum size, compare it to standard retail dimensions. That makes shopping faster and helps you avoid assuming a custom size is necessary.
Furniture sizing specs are commonly listed in both centimetres and inches across Australian retailers. The tables below use both so you can cross-reference product listings easily.
Liverpool Dining Table (Black)
Standard dining table height
Standard dining table height is 71 to 76 cm, with 76 cm being the most common. Height matters because it directly affects chair fit, knee room, and sitting posture. A table that sits too low, or has a thick apron that hangs too deep, will feel awkward even if the length and width are exactly right.
Liverpool Dining Table (Black)
Common rectangular dining table dimensions
Rectangular tables are the most widely available shape. They use space efficiently and generally offer the highest seating capacity for their footprint - which is why they remain the most popular choice for Australian dining rooms.
|
Size (cm) |
Approx. inches |
Typical Seating |
|---|---|---|
|
90 x 120 cm |
36" x 48" |
4 |
|
90 x 150 cm |
36" x 60" |
4 to 6 |
|
90 x 180 cm |
36" x 72" |
6 |
|
105 x 180 cm |
42" x 72" |
6 |
|
105 x 210 cm |
42" x 84" |
6 to 8 |
|
105 x 245 cm |
42" x 96" |
8 |
|
120 x 245 cm |
48" x 96" |
8 to 10 |
A width of 90 to 105 cm is standard for most dining tables. In tighter rooms, 75 to 90 cm wide can work better and preserves more clearance on each side.
Cedora's dining table collection includes several rectangular options in solid acacia and pine that sit within these standard dimensions - worth browsing once you have confirmed your ideal size range.
Common round dining table dimensions
Round tables work well in small or square rooms, though they still require full clearance around the entire circumference.
|
Diameter (cm) |
Approx. inches |
Typical Seating |
|---|---|---|
|
90 cm |
36" |
2 to 4 |
|
105 cm |
42" |
4 |
|
120 cm |
48" |
4 to 6 |
|
135 cm |
54" |
5 to 6 |
|
150 cm |
60" |
6 to 8 |
|
180 cm |
72" |
8 |
A pedestal base often makes round tables much easier to seat fully, since there are no corner legs to work around.
Common square and oval table dimensions
Square and oval tables are less common than rectangular, but both solve specific layout problems rather well.
|
Shape |
Size (cm) |
Typical Seating |
|---|---|---|
|
Square |
90 x 90 cm |
2 to 4 |
|
Square |
105 x 105 cm |
4 |
|
Square |
120 x 120 cm |
4 to 8 depending on base |
|
Oval |
90 x 150 cm |
4 to 6 |
|
Oval |
105 x 180 cm |
6 |
|
Oval |
105 x 210 cm |
6 to 8 |
Oval tables typically seat a similar number of people to their rectangular equivalents, but movement around the ends feels noticeably easier because there are no hard corners to navigate.
Dining Table Seating Capacity by Size and Shape
Seat count depends on more than table length. Chair width, leg placement, and whether you use end seats all affect the final number. Always distinguish between comfortable seating and maximum seating - they are rarely the same.
Rectangular table seating guide
|
Size (cm) |
Comfortable Seating |
Maximum Seating |
|---|---|---|
|
90 x 120 cm |
4 |
4 |
|
90 x 150 cm |
4 |
6 |
|
90 x 180 cm |
6 |
6 |
|
105 x 180 cm |
6 |
8 |
|
105 x 210 cm |
6 to 8 |
8 |
|
105 x 245 cm |
8 |
10 |
Exact counts vary by chair width and leg placement. End seats can feel tighter on tables with thick corner legs or large structural supports.
Liverpool Dining Table (Black)
Round table seating guide
|
Diameter (cm) |
Comfortable Seating |
Maximum Seating |
|---|---|---|
|
90 cm |
2 to 4 |
4 |
|
105 cm |
4 |
4 |
|
120 cm |
4 |
6 |
|
135 cm |
5 to 6 |
6 |
|
150 cm |
6 |
8 |
|
180 cm |
8 |
8 to 10 |
Round tables naturally support conversation because everyone faces inward. A pedestal base improves seating flexibility further, since there are no corner legs blocking knees at the edges.
Liverpool TV Unit (Natural)
Square table seating guide
- 90 cm square: 2 to 4 people.
- 105 cm square: 4 people comfortably.
- 120 cm square: 4 comfortably, sometimes more with slim chairs and an open base.
Square tables vary considerably depending on chair bulk and base style. They work best in balanced, square rooms where the proportions feel natural.
Comfortable seating vs. maximum seating
Allow 60 cm per person at minimum. For better comfort and fewer elbow bumps, aim for 65 to 75 cm per person.
That gap is why a retailer might list a table as seating 8, while it realistically seats 6 day to day.
|
Per Person Space |
What It Means in Practice |
|---|---|
|
60 cm |
Minimum for standard dining chairs |
|
65 to 75 cm |
More comfortable spacing with room to settle in |
As a real-world example: a 180 cm rectangular table usually seats 6 people comfortably, but may squeeze in 8 for a holiday meal if the chairs are slim and people do not mind sitting closer together.
Choose the Best Table Shape for Your Room Layout
The right shape can solve layout problems more effectively than adjusting a few centimetres here or there.
Rectangular tables for long or narrow rooms
Rectangular tables suit long rooms because they follow the room's natural proportions rather than fighting them. They use length efficiently, generally offer the highest seating capacity for their footprint, and work well in more formal dining layouts. In a square room, however, an oversized rectangle can feel dominant and difficult to move around.
Liverpool Dining Table (Natural)
Round tables for small or square rooms
Round tables are often the best choice for square dining rooms and compact spaces. Without hard corners to bump into, movement feels easier and more natural. Everyone seated also faces inward at a similar angle, which makes conversation flow well - particularly at smaller gatherings.
- Easier to move around in tight layouts.
- Naturally suited to square rooms.
- A softer, less imposing visual footprint.
The tradeoff is efficiency: large round tables seat fewer people than a rectangle of similar width, and anything above 150 cm in diameter can become hard to reach across comfortably.
Liverpool TV Unit (Natural)
Oval tables for better movement in tighter spaces
Oval tables combine much of the seating capacity of a rectangle with softer, more forgiving edges. They are a strong option when you want length but need easier circulation around the ends - and they tend to feel visually lighter than a rectangle of similar size.
Square tables for square dining areas
Square tables create a balanced, even layout that suits square rooms well. They are less practical in narrow or elongated spaces, and seating capacity drops off quickly compared with rectangular tables of a similar footprint. An expandable square table can add flexibility if you occasionally need more seats.
Liverpool TV Unit (Natural)
Which shape works best in an awkward room?
- Long and narrow room: rectangular.
- Nearly square room: round or square.
- Tight circulation: round or oval.
- Need more seating without sharp corners: oval.
In awkward rooms, the right shape often solves the problem faster than hunting for a table that is a few centimetres smaller.
Don't Forget Chair Space and Legroom
A table can fit the room perfectly on paper and still feel uncomfortable to use every day. That usually happens because chair size, leg placement, or under-table clearance was not factored in.
How much width should you allow per person?
Allow 60 cm per person at minimum. For better daily comfort, aim for 65 to 75 cm per person.
- 60 cm is the minimum for standard armless side chairs.
- 65 to 75 cm feels noticeably more relaxed for everyday dining.
- Armchairs need more width than armless chairs and can quickly reduce the realistic seat count.
Check the actual chair width against the seller's listed seat count. A table described as seating 6 may only comfortably seat 4 if your chairs are wide or generously upholstered.
Liverpool Coffee Table (Natural)
Standard chair-to-table clearance
Most dining chair seat heights sit between 43 and 48 cm. The typical gap from seat to tabletop is 25 to 30 cm. That gap matters - too little space feels cramped and awkward, while too much can make it difficult to rest your arms naturally on the table.
Liverpool Dining Chair (Natural)
Why apron clearance matters
The apron is the structural frame or skirt that sits just beneath the tabletop. A thick or low-hanging apron reduces thigh room even when the overall table height is standard. This is a common mistake when buying online, because people check the top dimensions and overlook the underside specifications entirely.
Pay close attention to under-apron clearance, especially if:
- The tabletop is particularly thick.
- The apron hangs low on the sides.
- You plan to use armchairs, or taller people will use the table regularly.
Check the spec sheet for under-apron clearance before you buy.
Pedestal base vs. four-leg table
The base style changes real seating flexibility more than many buyers expect.
|
Base Type |
Advantages |
Tradeoffs |
|---|---|---|
|
Pedestal base |
Better legroom throughout, easier to add an extra chair, ideal for round and square tables |
A bulky central column can feel visually heavy from certain angles |
|
Four-leg table |
Widely available, straightforward to style, familiar look |
Corner legs can block knees and reduce usable seating at the ends and corners |
This difference matters most on round, square, and shorter rectangular tables where every seat is important.
Liverpool Dining Table (Natural)
Chair choices that prevent sizing mistakes
- Armless chairs save space and usually make the seller's claimed seat count more realistic.
- Armchairs need extra width and may not slide under tables with a low apron.
- Benches tuck in neatly and look clean visually, but they are less convenient for frequent in-and-out use at busy family tables.
Dining Table Size Recommendations by Room Size
These recommendations translate the sizing rules into practical buying guidance. Use them as a starting point, then adjust for your specific room, furniture, and lifestyle.
|
Room Size |
Recommended Table Sizes |
Typical Seating |
|---|---|---|
|
3 m x 3 m |
90-120 cm round, 90 x 120 cm rectangle |
2 to 4 |
|
3 m x 3.7 m |
90 x 150 cm, 90 x 180 cm, 120 cm round |
4 to 6 |
|
3.4 m x 4.3 m |
90 x 180 cm, 105 x 210 cm, 120 x 210 cm, 135-150 cm round |
6 to 8 |
|
3.7 m x 4.9 m |
105 x 210 cm, 105 x 245 cm, 120 x 245 cm, 150-180 cm round |
8+ |
Best table size for a 3 m x 3 m room
In a 3 m x 3 m room, a 90 to 120 cm round table or a 90 x 120 cm rectangular table is usually the most practical choice. This size range suits 2 to 4 people well. A round table often works best here because it makes movement easier and avoids hard corners in a compact space. Avoid bulky or heavily upholstered armchairs.
Best table size for a 3 m x 3.7 m room
A 90 x 150 cm, 90 x 180 cm, or 120 cm round table is a practical choice for this room size. This typically suits 4 to 6 people. If one side of the room also serves as a walkway, the smaller option will usually feel much more comfortable in daily life.
Best table size for a 3.4 m x 4.3 m room
In a room this size, you can comfortably consider a 90 x 180 cm, 105 x 210 cm, 120 x 210 cm, or 135 to 150 cm round table. These sizes typically suit 6 to 8 people, though the actual fit still depends on room shape, chair size, and nearby furniture.
Best table size for a 3.7 m x 4.9 m room
A larger room like this opens up options including 105 x 210 cm, 105 x 245 cm, 120 x 245 cm, or 150 to 180 cm round tables. This size range suits 8 or more people. A bigger room supports a larger table - but only if clearance and circulation remain open and easy.
How to adapt these recommendations for open-plan spaces
In open-plan homes, measure the dining zone specifically - not the combined room.
- Leave more clearance on the side people walk through most frequently.
- Check sightlines so the table does not visually block the room.
- Account for nearby furniture such as kitchen islands, storage pieces, and any other items that affect the space.
- Keep at least one path generously clear, especially where the dining area connects to another zone.
For example: if your dining area sits between the kitchen island and the living room, you might keep 90 cm on the quieter side and 105 to 120 cm on the main traffic side.
When an Extendable Dining Table Makes More Sense
An extendable table is often the smarter choice when your room is a comfortable everyday size but occasionally needs to seat more people.
Best for smaller rooms that sometimes host guests
Extendable tables suit apartments, smaller homes, and multipurpose dining spaces particularly well. The everyday footprint stays manageable while giving you extra seats when guests arrive - which is often far better than living with an oversized table for most of the year.
Liverpool Dining Table (Natural)
Always measure the table fully extended
Always confirm an extendable table's full open dimensions before buying. Many buyers measure only the closed size and discover later that the extended table blocks a door or walkway.
When reviewing specs, check:
- Full extended length.
- Clearance when fully open.
- Actual chair count once leaves are added.
- Whether the extended table conflicts with doors, walkways, or other furniture.
Extendable vs. fixed table for everyday use
|
Type |
Best For |
Tradeoff |
|---|---|---|
|
Fixed table |
Simple daily use, minimal maintenance, solid and grounded feel |
No flexibility for larger groups |
|
Extendable table |
Smaller rooms, occasional hosting, flexible seating needs |
Extension mechanism adds complexity; open dimensions must be planned carefully |
Who benefits most from an extendable table?
- People who host guests occasionally rather than every week.
- Households where everyday space matters more than peak holiday capacity.
- Buyers who want flexibility without committing to an oversized room layout.
If you genuinely need full seating every day, a well-chosen fixed table in the right size is usually the better investment.
Small-Space Tips for Choosing a Dining Table
In a compact room, a few considered choices can make a significant difference to how the space feels and functions.
Choose narrower widths in tight rooms
A table that is 75 to 90 cm wide can feel considerably more comfortable than a 105 cm wide table in a small dining room. That narrower width preserves clearance on both sides and keeps the space easier to move through - without meaningfully reducing the number of people you can seat along the sides.
Liverpool Dining Table (Natural)
Consider round tables or pedestal bases
- Round tables improve movement in compact rooms because there are no corners to navigate.
- Pedestal bases free up knee space at every seat and add seating flexibility.
- Both options tend to feel less visually heavy in smaller layouts.
Use benches or armless dining chairs to save space
- Benches tuck fully under the table and reduce visual clutter significantly.
- Armless chairs generally fit more comfortably side by side and are easier to push in.
- The tradeoff with benches is convenience - they are less practical for people who get up and sit down frequently during meals.
Liverpool Dining Chair (Natural)
Try the painter's tape method before buying
Tape the table footprint on the floor before you order - especially for larger pieces or anything that would be difficult to return. Walk around it, pull chairs in and out, and see how the flow actually feels. It is one of the most reliable ways to test walkability in a small room without spending a cent.
Common Dining Table Sizing Mistakes to Avoid
These are the decisions that most often lead to cramped layouts, difficult returns, and rooms that never quite feel right.
Choosing based only on seat count
A label like seats 8 is not enough information on its own. Seat count should always follow room size, clearance requirements, and actual chair width. Using it as your first filter is one of the most reliable ways to end up with a table that does not work.
Ignoring clearance around the table
This is the most common mistake, and the most avoidable. A table can fit the floor plan and still function badly if chairs scrape the wall every time someone sits down, or walkways become too narrow to use comfortably. Start with clearance first, then choose the table that works within it.
Liverpool Dining Table (Black)
Forgetting chair size and chair arms
- Measure the actual chair width, not just the table.
- Add extra allowance for chair arms, which take up more horizontal space than most people expect.
- Check that armchairs slide under the table apron if you plan to tuck them in fully.
Not checking table legs or base placement
Table legs can quietly steal usable seating space, particularly at corner and end seats. Review underside photos and full spec sheets carefully, especially when shopping online where this detail is easy to overlook.
Buying an extendable table without measuring it open
Do not assume the extended size will still work comfortably. Before buying, confirm the full length with all leaves in, check the clearance after expansion, and make sure your chairs still fit at the stated seat count.
Liverpool Dining Table (Natural)
Buying for occasional events rather than everyday life
Do not size your dining room around one or two big gatherings a year. Daily comfort matters far more. If you only host large groups occasionally, extension leaves or temporary extra seating are a much better solution than living with an oversized table every other day of the year.
Quick Dining Table Size Checklist Before You Buy
Measure these first
- Measure the room or usable dining zone in centimetres.
- Mark doors, windows, sideboards, built-ins, and kitchen islands.
- Identify the main traffic path through the space.
- Note any furniture that stays nearby permanently.
Confirm these table-fit basics
- Leave at least 90 cm of clearance on all sides.
- Settle on a realistic daily seat count.
- Choose a table shape that suits the room's proportions.
- Confirm standard dining height - usually 76 cm.
Double-check comfort details
- Verify actual chair width, not just the table size.
- Check whether chair arms need extra allowance.
- Review under-apron clearance for legroom.
- Compare pedestal base versus four-leg impact on seating.
Test before you commit
- Tape the table footprint on the floor.
- Test chair pull-out space around all sides.
- Measure extendable tables at their fully open size.
- Buy for daily use first, entertaining second.
Liverpool Dining Table (Natural)
Material and Design Details That Matter Less Than Fit
Style matters - but fit matters more. Get the size right first, then make the aesthetic decisions.
Size comes before material
Timber, glass, stone, and metal all affect how a table looks and how much maintenance it needs. None of them change the clearance maths. Choose the right size first, then choose the material that suits your home and lifestyle.
A visually light table still takes up the same floor space
A glass-topped table or a design with slender legs may look smaller in product photography, but it occupies exactly the same footprint as a solid timber table with identical dimensions. Do not rely on visual lightness alone - always work from the actual measurements.
The Simplest Way to Choose the Right Dining Table Size
If you take nothing else from this guide, use this process:
- Measure your usable dining area in centimetres.
- Subtract at least 90 cm of clearance on each side.
- Match the result to a table shape and seat count that fits how you actually live.
- If you are deciding between two sizes, choose the smaller one.
That is the most reliable answer to how to choose a dining table size. Measure first, subtract clearance, compare against product specs, and tape out your top two options on the floor before you buy.
Liverpool Dining Table (Black)
Frequently Asked Questions
How much space do I need around my dining table?
At least 90 cm of clearance on each side is the standard minimum - enough for pulling out a chair and sitting down comfortably. In busy households, rooms that also serve as walkways, or open-plan homes where the dining area connects to the kitchen, 105 to 120 cm feels considerably better in daily use.
What size dining table do I need for a 3.7 m x 3.7 m room?
For a room this size, a 105 x 180 cm rectangular table or a 135 to 150 cm round table is often a practical and comfortable choice. The theoretical maximum is larger, but sizing down slightly tends to feel better once chairs and clearance are factored in.
Is 90 cm enough clearance around a dining table?
Yes - 90 cm is the accepted minimum for standard dining use. It gives enough room for a chair to be pulled out and for someone to sit down without feeling squeezed. For rooms with regular foot traffic or an open-plan layout, 105 to 120 cm will feel noticeably more relaxed.
How wide should a dining table be?
Most dining tables fall between 90 and 105 cm wide, which suits the majority of dining rooms well. In more compact spaces, a width of 75 to 90 cm can work better - preserving clearance on both sides while still seating people comfortably along the length.
How many people fit at a 180 cm dining table?
A 180 cm dining table comfortably seats 6 people. Depending on the table's width, chair style, and leg placement, it may accommodate up to 8 for casual or occasional gatherings - though 6 will feel more relaxed day to day.
Is a round or rectangular dining table better for a small room?
A round table is generally the better choice for a small or square room. Without corners to navigate, movement flows more easily and the table feels less imposing in a compact space. A rectangular table suits a long, narrow room more naturally, making better use of the available length.
What is the standard dining table height?
Standard dining table height sits between 71 and 76 cm, with 76 cm being the most common. Most dining chairs are designed with this height in mind, giving a comfortable 25 to 30 cm gap between the seat and the tabletop.
How much space should each person have at the table?
Allow at least 60 cm per person for comfortable dining. For a more relaxed feel - fewer elbow bumps and room to settle in - aim for 65 to 75 cm per person. Keep this in mind when comparing a retailer's stated seat count against your actual chair widths.
